Epic Bleed Block & Rotor Correction tool now included!
Full, easy-to-follow bleed instructions.
Perfect for beginners or experienced brake bleeders.
UK Delivery £1.99. FREE on orders over £20.
Our Tektro Bleed Kit offers you more than the official Tektro kit by providing the master cylinder bleed fitting and tube as standard - beware of other bleed kits that don't include this essential part. This is the definitive solution for servicing your hydraulic Tektro or TRP hydraulic brakes.
Includes 50ml of high quality mineral oil brake fluid - enough to bleed front and rear brakes once. Want more? Simply add an extra bottle to your order.
Our syringes have been designed without rubber plunger seals to ensure that they do not react with mineral oil brake fluid making them perfect for bleeding your Tektro/TRP brakes.
Compatible with all Tektro and TRP disc brakes including Quadiem G-Spec, Slate, Hy/Rd, HDC300, Auriga, Draco, Gemini, Mota & Orion models.
Say no to expensive labour costs, and the two week wait at your local bike shop, let us guide you through the simple, DIY task of bleeding your own Tektro/TRP brakes. We're ready when you are.
Join over 75,000 riders who've bled their brakes with us! Buy your Bleed Kit for Tektro/TRP Brakes from Epic Bleed Solutions - No.1 for mountain bike brake bleeding.
Wish I hadn’t bothered with the instructions, talks about catching fluid in a plastic bag. By the time I’d spotted the instructions were wrong I’d wasted some fluid and could not complete the job. Far too little fluid supplied to do both brakes
Hi Peter. Thank you for your feedback.
The instructions provided with our Tektro/TRP Bleed Kit have to cover a wide range of brake models which vary significantly and so it is difficult to create a guide which will address each model.
However, I can say that our instruction sheet for this model has been updated over the last couple of days and will hopefully be an improvement for future customers. You can download this sheet via our downloads section.
The 50ml of brake fluid supplied is enough to bleed one set of brakes. If the brake fluid needs to be completely replaced, or the system flushed several times it is wise to have an additional bottle of fluid on standby for this.
I hope this helps.
J
10/09/2020
Jb
Sweden
Won't help
I have tried all different ways of doing this. But my tektro auriga won't get stiff. I've watched hours of bleeding on YouTube and read the instructions and asked for help, but it won't work. My lever for my back brakes are still soft and goes almost all the way in.
Tried with both syringe. Tried with one and a bag. Etc.
Tried back and forth several times. Tried to pull the air out on both sides.
Tried "closing" the lever and just doing the caliper. Just as bad as before if not worse... Seems like 15gbp waste for me?
This went way better than I expected. When I saw that my brakes do not have nipples I expected a complete mess and risk of introducing more air than was there in the first place plus some dirt too. In fact I took it carefully and slowly and there were no problems at all. The old fluid looked clean and clear of air but even so the brakes are much firmer now and lever travel is reduced.
I used the kit to bleed a Hy/Rd caliper that wasn't giving enough stopping power on my rear wheel. The kit was easy to use - i followed a youtube guide, and it was straightforward. I wasn't very good at getting the bubbles out the syringe, so suggest you make sure you know how to do this.
I found the kit easy to set up and with the YouTube link you provided, the job was done in half the time I had allotted, so much so that I did the front brakes as well just as a matter of course. Thanks to everyone involved at epic, I will be buying from you when I need replacement syringes
United Kingdom
Sweden
